Monday, June 19, 2023

Gonkoken nanoi

The Great Dinosaur Drought of 2022–2023 persisted from mid-December 2022 to early June 2023, nearly six months with three new dinosaurs and one silesaur, but with five showing up in the past few weeks, it looks like things have gone back to business as usual. Obviously that calls for some recognition, so this week and next week (pending anything else) I'll look at a couple of new arrivals, starting with the not-quite-hadrosaurid Gonkoken nanoi from the south end of Chile.

Figure 2 in Alarcón-Muñoz et al. (2023), showing a reconstruction of Gonkoken nanoi and an assortment of bones (CC BY 4.0).

Sunday, June 4, 2023

Uŋčí Makhá Park Revisited, Part 2: Further Fossils

We're now up to the fourth entry in a completely unexpected series on the Platteville–Decorah rocks and fossils of Uŋčí Makhá Park. We've already seen the common fossils from the site, so for this go-round I'm focusing on rarities.

Sunday, May 28, 2023

Uŋčí Makhá Park Revisited, Part 1: Freeze-Thaw

After I'd come across the new exposures at Uŋčí Makhá Park last fall, I was very curious about how a Minnesota winter and spring would treat them. After all, these were fresh, with no previous direct exposure to snow, ice, and freeze-thaw cycles. Would they rapidly degrade, or were they made of sterner material? Last week I had the opportunity to spend some quality time at the park, in preparation for and leading a training session for Mississippi National River & Recreation Area seasonals (and if any of the participants happen on this post, hello! I hope you had a good time!).

What were the results of this natural experiment? A few observations:

The Carimona Member of the Decorah (blue-gray upper interval), particularly the blocks used as landscaping, suffered appreciably more than the Magnolia Member of the Platteville (tan lower interval). I attribute this to the greater shale content of the Carimona.

This is a pretty illustrative comparison. The blue-gray block on the upper left is Carimona, and the tan block on the lower right is Magnolia. The Carimona block's upper surface is littered with small chips, while the only chips on the Magnolia block came from the Carimona block. (Note also the large burrow on the Magnolia block.)

More Carimona landscaping showing exfoliation.

This indicates that the Carimona blocks will weather faster than the Magnolia blocks; eventually, both lithologies will reach equilibrium with their new surroundings, but the "fucoidal" surfaces on the landscaping are going to go away faster than the shell beds.

Note the burrows popping off the surface in some places.

It wasn't all smooth sailing for the Magnolia, though. Although many blocks and beds seemed fine, others had definite signs of damage.

Here a thin bed is breaking up.

This isolated block appears to be shattered. (Colors are weird because when I took this photo, I'd forgotten to reset the lighting from tungsten bulbs.)

Unlike last fall, which was a time of drought, this spring we can also definitely see where the seeps are.

And they're concentrated at the bentonite layers in the Carimona.

Many fossils and features came through without particular damage, though. I included a photo of a bivalve in the fossil guide post. Here it is last week:

Dare I say that it's "happy as a clam"? (Ignore the color balance differences.)

With that out of the way, did we find other fossils I hadn't seen in the fall? Well, of course! Tune in next week for some less-typical fossils!

Sunday, May 7, 2023

Replacement of Fossils

You might think that getting a shell or bone or wood chunk safely buried is the tough part for fossilization, that once something's entombed in sediment it's all smooth sailing. Burial is certainly important, but it's not the end of the story. A lot of things can happen between deposition and exposure. Pore spaces are filled with new minerals. Existing minerals are replaced. Entire structures can be replaced, then lost. These changes all fall under diagenesis. What exactly happens depends on things like the physical and chemical structure of the object in question, temperature and pressure of burial, and the chemical composition of the fluids in the sediment. Denser fossils like teeth are less vulnerable to changes than more porous materials. The form of calcium carbonate known as aragonite is less stable than calcite. Many different minerals and mineraloids can get involved in the fun; for example, there are opalized fossils and pyritized fossils.

Bivalve mold and internal cast (steinkern). Not pictured: bivalve shell.

Because silica and carbonate minerals are so abundant at typical surface and near-surface temperatures and pressures, they are the minerals most frequently involved. In Minnesota, we generally get dolomitization. This is somewhat inconvenient, because dolomitization has a tendency to destroy fossils, and even when it doesn't, it usually leaves behind molds and casts that aren't as crisp as the original. It's a bit like replacing the Venus de Milo or Michelangelo's David with nothing but 2x4 Lego bricks; you'll notice a difference. Dolomitic replacement may give a fossil a quirky sparkly appearance thanks to the dolomite rhombs, but that's about the only plus. Pervasive dolomitization is why many fossils in the Platteville are gray with a sugary appearance: you're actually looking at a natural mold or cast of the original in dolomite.

Sometimes diagenesis gives you exotic, spectacular fossils, and sometimes it gives you dolomite.

Although once in a while you get something to write home about; this is a nautiloid in the Science Museum of Minnesota collections with its internal structures replaced.

I was inspired to write a note about this topic by a different kind of replacement. Someone reviewing one of my work projects commented on a type of replacement seen in some of the fossils, consisting of circular mineralizations. They informed me this was a kind of silicification known as beekite. This immediately twigged my memory banks, because I'd also seen it in photos of fossils from other work projects. Like dolomitization, it's not exactly faithful reproduction, although it can be aesthetically pleasing.

A beekitized (beekitified?) lower Permian brachiopod, central Kansas.

Sunday, April 23, 2023

The Face of Diamantinasaurus (and some other body parts)

One of the things that was frequently missing from "Your Friends The Titanosaurs" was heads. Sure, there were a fair number of lower jaws and braincases, but actual faces were few and far between. Skulls just don't seem to have stuck with the rest of the skeleton, and in general were not made of the sternest material in a titanosaur's body. (Bitey parts of the skull, yeah, those are more robust. Braincases, yeah, those are knots of bone. Stuff in between? Not so much.) Several entire continents are unrepresented by reasonably complete titanosaur skulls. We can now scratch Australia off that list, thanks to Diamantinasaurus matildae, as described in great detail by Poropat et al. (2023).

(...or can we? See below!)

Monday, April 10, 2023

The Conulariid Interior

Today we check in with one of the more unusual members of Paleozoic seafloor communities: Conulariida. The "four-sided herringboned ice cream cones" still hold many mysteries (including the mystery of the whereabouts of George Sinclair's collection; I'd still be interested in knowing more about that!). One of the major mysteries has been what exactly the soft parts of the animal looked like; if we knew that, we'd know a lot more about how conulariids are related to other animals, how they fed, how they looked, etc. It's generally assumed they are some kind of cnidarian (along with corals, jellyfish, sea anemones, and so on). Wikipedia has them potentially aligned with Staurozoa, which today is represented by stalked jellyfish (worth looking up if you've never heard of stalked jellyfish).

A cnidarian identity would imply stinging tentacles, but these have never been firmly identified. Soft parts in general are not particularly well-known for conulariids, which makes sense because preserving the soft parts of cnidarians is not something that just happens as a matter of course. (We could use a late Paleozoic amber-producing coastal forest that was flooded by a storm that dredged up all kinds of marine organisms.) There were some potential finds in the 1980s, as discussed in Babcock and Feldman (1986a) and Sendino et al. (2023) (see Figure 30 in Babcock and Feldman 1986b for internal casts and x-ray image of a conulariid's putative guts). Recently, Sendino et al. (2023) have applied X-ray micro-Computed Tomography (μCT) to a collection of well-preserved Pennsylvanian-age conulariids from the Wewoka Formation of Oklahoma and the Finis Shale Member of the Grand Formation of Texas.

What can μCT see in a conulariid? First off, it can see the concealed end of one conulariid partially within another conulariid. This is a good sign as a sanity check because we can confirm it can discern something that obviously should be there. With that encouraging information in mind, what else is there?

Figure 4 in Sendino et al. (2023); it's always good to see what you *ought* to see. CC BY 4.0.

Sendino et al. (2023) found "longitudinal bundles" in many of their specimens, i.e., oriented apex–aperture. The authors interpreted these as muscles for closing the flaps of the aperture. (This tells us a few things about the muscular and nervous systems of conulariids.) In some examples there was also an internal structure they interpreted as a possible gastric cavity. In other specimens, the internal sediment was clearly replaced, for example by sand, or contained other fossil material such as forams or a tiny drilled brachiopod. The internal sediment of some specimens appears to have been disrupted by later burrowing. A number of the conulariids also show scars from external attacks (conulariids seem to have been easy targets). The article, which is freely available, is heavily illustrated with μCT images, followed up by a series of supplementary files of large images.

And this is their basic interpretation (Figure 13). CC BY 4.0.

In other business: I'll be giving a talk for the Geological Society of Minnesota on Monday, May 8: "Snorkeling at Shadow Falls: Fossils of Minnesota". Non-members are welcome!

References

Babcock, L. E., and R. M. Feldmann. 1986a. Devonian and Mississippian conulariids of North America. part A. General description and Conularia. Annals of the Carnegie Museum 55:349–410.

Babcock, L. E., and R. M. Feldmann. 1986b. Devonian and Mississippian conulariids of North America. part B. Paraconularia, Reticulaconularia, new genus, and organisms rejected from Conulariida. Annals of the Carnegie Museum 55:411–479.

Sendino, C., B. Clark, A. C. Morandini, T. Salge, M. Lowe, and W. Rushlau. 2023. Internal conulariid structures unveiled using µCT. PalZ (2023). doi:https://doi.org/10.1007/s12542-023-00649-7.

Monday, March 27, 2023

Prasopora, with a comment on biostratigraphy

Prasopora, the "gumdrop bryozoan", is one of the most recognizable Ordovician fossils in Minnesota. Museum collections from Minnesota have boxes of the little darlings rattling around together. And I—I hardly ever see the dang things in the field.

Yes, one of these things; a bit more "chocolate kiss" than "gumdrop" but well within morphological variation.

While my competence in many fields is questionable at best, in this case you can be assured I would recognize a Prasopora if I saw one, even if it was years before I learned the stress goes on the second syllable rather than the third. (I have an unerring instinct for putting the stress on the wrong syllable for scientific names I've read but never heard.) No, the real issue here is one of biostratigraphy. My usual stomping grounds cap in the lower third of the Decorah, and Prasopora doesn't really kick in until the middle–upper Decorah. This has been recognized since the days of "The Geology of Minnesota" (Ulrich 1895; Winchell and Ulrich 1897). At that time eight species were recognized (P. affinis, P. conoidea, P. contigua, P. insularis, P. lenticularis, P. oculata, P. selwyni, and P. simulatrix), all of which were restricted to a range extending from the "Fucoid and Phylloporina beds" of the "Black River Group" (roughly Sardeson bed 5, middle–upper Decorah) to the "Fusispira and Nematopora beds" of the "Trenton Group" (as high as Sardeson bed 8, in the Prosser Limestone) (Winchell and Ulrich 1897; approximate correlations after Sloan 1987). None of them are listed in equivalents to Sardeson beds 3 and 4, in the lower Decorah, and only P. conoidea, P. contigua, P. lenticularis, and P. simulatrix were reported from the closest "Fucoid and Phylloporina beds".

Same specimen as above, which has a convenient break showing a partial cross-section; it's not solid all the way through.

Forty years later Stauffer and Thiel (1941) were not quite as dainty in their stratigraphic divisions, simply having a Decorah Shale Member of the Galena Formation and a Spechts Ferry Member of the Platteville Formation (approximately the Carimona Member of the Decorah). The "Spechts Ferry" gets Prasopora grandis, which had been Monticulipora grandis back in 1897, when it had been reported from the Stictoporella bed (lower Sardeson bed 3). P. grandis also appears in S&T's Decorah Shale Member list along with the four "Fucoid and Phylloporina beds" species, Stauffer presumably having stratigraphically higher specimens of P. grandis than W&U. Whether or not grandis pertains to Prasopora has been a matter of some dispute, and it seems to have wandered back to the metaphorical arms of Monticulipora. More importantly, it doesn't look like classic gumdrop Prasopora, instead being "irregularly massive, often tending to become lobate or subramose" (Ulrich 1895). In other words, it's not the kind of thing the typical fossil enthusiast would associate with the genus.

Wee little discoidal Prasopora.

My personal experience with Prasopora is limited to a few pieces in the Valentine box that appear to represent P. conoidea and a small discoidal species, a couple of small discoidal specimens that blur the line between early-stage Prasopora and "less famous bryozoan encrusting the external surface of an inarticulate brachiopod in an aesthetically pleasing Prasopora-like way", and one great honking lopsided hoof of a colony I found a few years ago at a basement excavation. I don't generally attempt to assign species to bryozoan fossils, but P. simulatrix is the only species described by Ulrich (1895) to attain dimensions even vaguely like it, so I'll go with that.

A top view of an unfortunately resolutely three-dimensional object.

And the underside, showing the distinctive layering and a few bits of other things that became part of the structure.

Bonus news: for those of you who've had your fill of gumdrop bryozoans, the spring 2023 edition of the NPS Park Paleontology newsletter is now available.

References

Sloan, R. E. 1987. History of study of the Middle and Late Ordovician rocks of the Upper Mississippi Valley. Pages 3–6 in R. E. Sloan, editor. Middle and Late Ordovician lithostratigraphy and biostratigraphy of the Upper Mississippi Valley. Minnesota Geological Survey, St. Paul, Minnesota. Report of Investigations 35.

Stauffer, C. R., and G. A. Thiel. 1941. The Paleozoic and related rocks of southeastern Minnesota. Minnesota Geological Survey, St. Paul, Minnesota. Bulletin 29.

Ulrich, E. O. 1895. On Lower Silurian Bryozoa of Minnesota. Pages 96–332 in L. Lesquereux, C. Schuchert, A. Woodward, E. Ulrich, B. Thomas, and N. H. Winchell. The geology of Minnesota. Minnesota Geological and Natural History Survey, Final Report 3(1). Johnson, Smith & Harrison, state printers, Minneapolis, Minnesota.

Winchell, N. H. and E. O. Ulrich. 1897. The lower Silurian deposits of the Upper Mississippi Province: a correlation of the strata with those in the Cincinnati, Tennessee, New York and Canadian provinces, and the stratigraphic and geographic distribution of the fossils. Pages lxxxiii–cxxix in L. Lesquereux, C. Schuchert, A. Woodward, E. Ulrich, B. Thomas, and N. H. Winchell. The geology of Minnesota. Minnesota Geological and Natural History Survey, Final Report 3(2). Johnson, Smith & Harrison, state printers, Minneapolis, Minnesota.